KR-AW60 Automatic Four-ball Anti-wear Tester
1. Introduction: The lever four-ball friction tester is in the form of sliding friction and is mainly used to evaluate the bearing capacity of lubricants under extremely high point contact pressure conditions. Including the maximum non-seizing load PB, sintering load PD, comprehensive wear value ZMZ and other three indicators, in actual applications, different evaluation indicators can be selected according to the various uses of the lubricant. The ambient temperature of the test engine oil box can reach up to 250°C, and can be pre-selected for time, friction, temperature, etc., and can also determine the friction coefficient of frictional parts. The testing machine is mainly suitable for the evaluation of lubricating oil. It has a wide range of application prospects in various professional fields of tribology, petroleum, chemical, energy and other industries, universities, research institutes (institutes) and other departments. 2. Program description: The testing machine is mainly composed of spindle drive system, weight lever system, oil box and heater, friction measurement system, industrial integrated machine programmable terminal (which can realize the preset and control of friction, speed, time, temperature and other parameters , Alarm, display), electrical control system, strong current system and other parts, they are all installed on the frame with the base as the main body. 2.1 Spindle drive system The main shaft is driven by an ESTUN servo motor and an AC servo system. The rated power of the system motor is 1.5kW, the speed adjustment range is 200~2000r/min, and the speed is stepless. The spindle speed accuracy can reach ±10r/min. 2.2 Weight lever system The lever weight system consists of a knife bearing blade, a lever and a hook weight. The lower knife bearing is supported by a double knife bearing, so that the lever transfers force more smoothly and accurately. The lower supporting blade is the fulcrum of the lever weight system, and the force transmission blade transmits the force applied by the lever system to the oil box and the friction pair. The knife-edge hook improves the accuracy of force transmission and is placed at a suitable lever ratio position as required. 2.3 Oil box and heater The guide part under the oil box is equipped with imported linear bearings, which reduces the friction between the oil box seat and the main body and makes the test force value more accurate. A ring heater with a power of 250W and a rated voltage of 220V is installed outside the high-temperature oil box. It must be in close contact with the high-temperature oil box to obtain a stable temperature control. The platinum resistance temperature measuring resistor is fixed on the temperature measuring oil box seat, and its top extends out of the temperature measuring oil box seat. The lead wire of the temperature measuring platinum resistance extends out of the oil box through the holes around the oil box and is connected to the controller. The test temperature is controlled by digital display from room temperature to 250°C, and the signal is output. The temperature control accuracy can be controlled at ±2°C. 2.4 Friction force measurement system When the steel ball friction pair works, due to the axial pressure, the friction torque is generated when the main shaft rotates. The friction force arm and the friction force sensor generate a small unbalanced signal corresponding to the force. The measurement system displays the value of friction. 2.5 Electrical control system The electrical control system adopts modular control, strong anti-interference ability, stable performance/parameter setting, operation, calibration and other operation interfaces. Various operations are completed on the industrial integrated machine. The setting interface can realize the setting of test conditions, and the running interface can carry out test operations. Real-time display of test data, such as friction, speed, temperature, time, etc. Various relevant curves can be displayed, and the test data can be analyzed and processed. 3. Main technical performance indicators: NO. | Name | Parameters | 1 | Test force | | 1.1 | Maximum test force | 10kN | 1.2 | Below 4% of the maximum test force, the test force indication error | ±5N | 1.3 | Above 4% (inclusive) of the maximum test force, the relative error of the test force indication | ±1% | 1.4 | Test force loading method | Manual loading of weights | 2 | Friction | | 2.1 | Maximum friction | 200N | 2.2 | The relative error of the displayed value of friction should not be greater than | ±3% | 2.3 | Automatic stop for heavy load overload | | 3 | Testing machine heating system | | 3.1 | Temperature control range | Room temperature~250ºC | 3.2 | Temperature control accuracy | +2ºC | 4 | Spindle speed | | 4.1 | Spindle speed range | 200r/min~2000r/min (Steplessly adjustable) | 4.2 | Speed control accuracy | ±10r/min | 5 | Taper of spindle bore | 1:7 | 6 | Amount of oil used in one test | 10ml | 7 | Nominal diameter of special standard steel ball | φ12.7 | 8 | Spindle motor power | 1.5kW | 9 | Test machine spindle control | | 9.1 | time control | | 9.2 | Friction control | | 10 | Test machine time display and control range | 1s~9999min | 11 | Overall dimensions of the testing machine (length×width×height) mm | 1185×505×1565 |
4. Wear scar video measurement system: The wear scar video measuring instrument is mainly used to measure the diameter of the wear scar in the four-ball test. Meet the requirements of GB3142, GB12580 for test data measurement. In addition, the measuring instrument can also be used for sample observation of the ring block wear tester. 4.1. Main technical performance indicators 1) Measuring accuracy: 0.01mm 2) Measuring range of wear scar: 0-4mm 3) Measuring table diameter: 114mm 4) Adjust the upper and lower measurement space by the adjustment handwheel 5) Image acquisition, editing and annotation, image storage, experimental data processing and storage, and report generation and printing
About Kolery Instrument Located at Chongqing - a national municipality as well as southwest electromechanical manufacturing center, Kolery has many years of experience in the field of petroleum laboratory equipment solutions. Our company is mainly engaged in petrochemical analysis instruments design and produce, like karl fishcher moisture analyzer, Kinematic Viscometer, oil flash point tester, petroleum distillation machine etc. We have our own factory, and our products have good competitiveness in both of quality and price. As we understand the importance of the lab equipment quality to experimental analysis, Kolery has been committed to providing high-quality oil lab instruments to meet the customer's pursuit of accurate experimental results. We will recommend the most suitable product model based on the customer's requirements on technical parameters and experimental results. In addition to the expertise petroleum and oil analysis products, we are also familiar with the entire foreign trade process, and can quickly resolve various problems encountered by customers to ensure that trade can be proceed smoothly during the delivery period requested by customers.
FQA
Q: What are the available delivery methods? A: Our port location: Shanghai, Chongqing or other main ports of China Delivery methods: by sea, by air, by truck, by express Delivery range: worldwide Q: How long is the probable delivery date? A: Delivery time is differs with order quantity, technical parameters requirements, etc. For most of our oil testing equipment and other lab equipment, like halogen moisture tester, spectrophotometers, the delivery date is about 3-7 business days. Please contact with us for more details. Q: What are the available payment methods? A: Payment methods: By T/T, L/C, Western Union, Paypal, etc. Payment terms: Generally, for small order T/T 100% advanced, we also accept T/T 40% advanced, the balance paid by T/T when the machine is ready. For big order, we can accept 100% irrevocable L/C at sight. Q: How long is the warranty period? A: We warrants most of machines supplied under agreed specification against defects in material and workmanship under normal use and service for a period of 1 years from the time customer receives the goods. For some items, we offer 2 years warranty. Please contact us for details about this. Q: What's the mini order quantity? A: MOQ: 1 unit/set
Packing and Shipping 1. Delivery time: for most of our products, it takes about 3-5 business days. We will do all test before shipping out to make sure goods arrive you in good condition.
2. We can ship by air, by sea, by express, by land. We can also use your pointed forwarder.
3.Packing: We use export wooden case for most of our products. Payment Term
| MOQ | 1 Set | | Trade Terms | EXW, FOB, CIF, CFR | | Payment Terms | T/T, L/C | | Port of Loading | Any Port of China | | Packing Method | Internaional Standard Wooden Case | | Transportation Method | By Sea, By Land, By Air, By Express | | Supply Capability | 200 Sets/Month |
After Sales Service
* The warranty period is 24 months from commissioning acceptance date on. After the warranty period is over we provide lifelong maintenance and technical service.
* We guarantee the maintenance time no more than 3 working days and response time within 8 hour.
* We build instrument service profile for our clients to record the product service and maintenance conditions.
* After instruments start service, we will pay follow-ups to collect the service conditions.
|
){kind=link}